Milwaukee’s M18 FUEL 6-1/2 in. plunge track saw is not a new tool: the 2831-20 bare saw reached stores in late 2022, and the 2831-21 kit with a 6.0Ah battery is the version most buyers see today. On November 14 Ace Hardware’s US site listed that kit at $689, and you still need to buy rails separately. If you already own M18 batteries, it is the obvious track saw to look at first; if you do not, the price of entry is higher than the saw alone suggests.

When did it come out and what did it cost then?

Milwaukee showed the saw at its Pipeline 2022 event, and Tool Box Buzz reported a $599 kit price with an October release. The Acme Tools blog, updated on November 27, 2022, said the bare tool had “finally released” after earlier delays. By the April 2023 issue of Woodshop News, the 2831-21 kit was quoted at $549.

Prices have moved since, so treat any figure as a snapshot. The $689 Ace listing on November 14 is for the kit with battery, charger and PACKOUT case.

What are the key specs?

Milwaukee’s product page gives these figures.

Spec Milwaukee 2831
Speed 2,500 to 5,600 RPM
Cut capacity 2-1/4 in.
Bevel -1 to 48 degrees
Arbor 20mm
Weight without battery 9.8 lbs
Warranty 5 years

Watch the speed figure. Early previews and some retailer pages, including Acme Tools and Ace Hardware’s overview, quote 6,300 RPM, while Milwaukee’s current spec list and Ace’s own spec table say 5,600. Go by Milwaukee’s page.

Other features on the product page: bevel stops at 0, 22.5 and 45 degrees, a variable speed dial, a micro-adjust depth knob, an adjustable cam to remove play on the rail, and a riving knife.

What comes in the kit, and what do you still need?

The 2831-21 kit has the saw, one M18 REDLITHIUM HIGH OUTPUT XC 6.0 battery, a multi-voltage rapid charger and a PACKOUT XL tool box. The bare 2831-20 comes with a dust bag, a blade and a splinter guard.

No rail is included in either. Milwaukee sells 31 in. (48-08-0570), 55 in. (48-08-0571) and 106 in. (48-08-0572) rails, plus clamps, a connector, anti-splinter and non-slip strips and a rail bag that fits only the two shorter rails. To rip an 8 ft sheet you need the 106 in. rail or two 55 in. rails joined with the connector. Milwaukee’s press text mentions a 108 in. rail while the SKU list says 106 in., so check the length on the listing.

Blades: 24T general purpose, 40T finish, 48T fine finish, 52T laminate and a 4T fiber cement blade, all 6-1/2 in. on a 20mm arbor.

How does it compare with Makita and DEWALT?

The two closest cordless rivals take different routes to power. Figures below are from each maker’s product page.

Milwaukee 2831 Makita XPS02ZU DEWALT DCS520B
Battery one M18 (18V) two 18V LXT (36V) one FLEXVOLT 60V MAX
Max depth at 90 degrees 2-1/4 in. 2-3/16 in. 2-1/8 in.
Max depth at 45 degrees not listed 1-9/16 in. 1-5/8 in.
Speed 2,500 to 5,600 RPM 2,500 to 6,300 RPM not listed
Weight 9.8 lbs without battery 11.2 lbs with batteries not listed
Dust port 1-7/8 in. 1-7/16 in. 1-1/4 in.
Warranty 5 years 3 years 3 years

Milwaukee has the deepest listed cut and the longest warranty. Makita’s saw needs two batteries but adds AWS, a Bluetooth link that switches a compatible Makita dust extractor on with the trigger. DEWALT rates its saw at 90% dust collection with a vacuum, close to Milwaukee’s “over 90%” claim; neither figure comes with published test conditions.

How well does it cut and collect dust?

Milwaukee claims finish quality cuts, over 90% dust collection and enough power to rip 2 in. oak or walnut without bogging down. In its hands on preview, Tool Box Buzz cut 2 in. walnut successfully but called the finish “not great” with the general purpose blade, and rated dust collection “good but not great”. Use the 40T or 48T blade for hardwood edges you plan to show.

Tool Box Buzz also reported that Milwaukee’s rail is compatible with Makita and Festool saws. Milwaukee itself makes no cross brand claim, so confirm the fit before mixing systems.

Who it suits

  • Finish carpenters and remodelers on M18: existing batteries carry over and the warranty is the longest of the three. Budget for the 106 in. rail and clamps.
  • Cabinet and countertop installers: the cam adjustment and anti-splinter strip target clean sheet goods cuts. Buy the 48T or 52T blade for veneers and laminate.
  • Serious DIYers new to M18: the kit includes a battery and charger, but rails push the total well past the kit price. Compare the full cost with a circular saw and guide.
  • Makita or DEWALT owners: the Makita XPS02ZU and DEWALT DCS520 run on batteries you already have and are close on depth. Stay on your platform unless the warranty matters most.

Still unclear: independent dust collection measurements and current rail prices at most retailers.

Before buying, price the kit together with the rail length you need on Milwaukee’s Where To Buy list, then compare that total with the bare 2831-20 if you already own an XC 6.0 or larger M18 battery.