None of the three big cordless heat guns is new: DEWALT launched the DCE530 in summer 2019, a trade directory listed Makita’s XGH02ZK in June 2022, and Pro Tool Reviews already covered Milwaukee’s M18 2688-20 on a page titled for 2023. What separates them is temperature range, weight and the battery you already own. Makita lists the hottest output at 1,022°F, DEWALT 990°F and Milwaukee 875°F, while Milwaukee claims the fastest warm up.
How do the official specs compare?
Figures below come from each maker’s product page or press release, except where a retailer is named.
| Spec | Makita XGH02ZK | DEWALT DCE530B | Milwaukee 2688-20 |
|---|---|---|---|
| Platform | 18V LXT | 20V MAX (18V nominal) | M18 |
| Max temperature | 1,022°F | 990°F | 875°F (Tool Nut listing) |
| Heat control | 6 settings | 2 settings | not listed |
| Airflow | 2.5 and 3.9 CFM | 6.7 CFM on high | 6 CFM (Tool Nut listing) |
| Warm up | not listed | high temperature measured after 340 seconds | under 7 seconds |
| Runtime claim | 30 min low, 21 min high on 6.0Ah | 42 min on low with 5Ah | over 40 connections on XC5.0 |
| Weight | 2.9 lbs with battery | 1.17 lbs without battery | 1.7 lb (Tool Nut listing) |
| Nozzles and extras | 4 nozzles and case | flat and hook nozzles | guarded nozzle, ladder hook |
| Warranty | 3 years | 3 years | 5 years (Tool Nut listing) |
Makita’s six settings are ambient air, 302°F, 482°F, 662°F, 842°F and 1,022°F. DEWALT says its nozzle is a standard size, so some corded and other brand attachments fit.
Watch the test conditions. DEWALT measures its 990°F on high after 340 seconds, 0.4 mm from the nozzle, so it takes several minutes to reach its peak. Milwaukee’s “under 7 seconds” refers to reaching operating temperature for heat shrink work, which is a lower target.
How much do they cost?
All three are sold as bare tools, so the price below does not include a battery. These US prices were listed on November 14:
- Milwaukee 2688-20: $99.00 at Tool Nut, on sale from $159.00.
- DEWALT DCE530B: $179.00 at Ace Hardware. DEWALT’s 2019 launch price was $119 for the bare tool and $199 for the DCE530P1 kit with a 5.0Ah battery and charger, so compare stores.
- Makita XGH02ZK: $229.00 at Tool Nut, out of stock with 12 to 18 day shipping.
If you need a battery as well, a kit such as the DCE530P1 can work out cheaper than buying the parts.
Where do trade outlets disagree with the makers?
Quite a lot, so read comparisons with care. Pro Tool Reviews, on a page whose title still says 2023, quotes the Makita at 7.1 CFM and “over 1000°F”; Makita’s current page says 2.5 and 3.9 CFM and 1,022°F. A June 2022 Vehicle Service Pros listing gave 4.2 and 7.1 cfm, so older figures are still in circulation. Check Makita’s own page.
Power Tools Insider, in a guide updated September 3, 2026, says the DEWALT has three heat settings plus fan only; DEWALT’s page and its 2019 release say two. Both outlets say they do not hand test every tool listed, and neither explains how it measured runtime.
What about Bosch and Ryobi?
Power Tools Insider rates the Bosch GHG 18V-50 at 932°F with two settings and 1.88 lbs, and Pro Tool Reviews lists the Ryobi 18V ONE+ P3150 at 875°F with a claimed 10 second warm up. These are outlet figures, so confirm them on Bosch and Ryobi’s pages.
How hot do you actually need it?
Less than most buyers think. Pro Tool Reviews gives typical jobs as soldering at 600 to 700°F, paint stripping at about 600°F, softening plastic at 350 to 400°F and adhesives at about 300°F. Makita’s fine steps help at the low end; Milwaukee’s quick warm up suits repeated heat shrink.
Weight and peak heat are the trade offs. Pro Tool Reviews notes that a corded 11 amp Milwaukee 8977-20 weighs 1.8 lb, and Power Tools Insider says premium corded guns reach 1,100 to 1,200°F, beyond any of these cordless models.
Who it suits
- Electricians on M18: the 2688-20 warms up fastest and is the cheapest of the three at the November 14 sale price. Its 875°F ceiling is the lowest here, so it suits heat shrink more than paint stripping.
- Tradespeople on 18V LXT: the Makita has the widest range and the highest listed ceiling. Keep a 6.0Ah battery for high heat.
- Tradespeople on 20V MAX: the DEWALT has the longest listed runtime on low and takes standard nozzles, but only two settings and a slow climb to peak heat.
- Occasional DIYers: for decals, shrink tubing or softening PVC, buy the bare tool for the battery you already own.
- Anyone stripping paint all day: a corded gun still wins on peak heat and runtime.
Before ordering, open the maker’s page for your platform, confirm the temperature and nozzle set, and compare the bare tool price with a kit if you need a battery.





