Makita’s GLC04 is a 40V max XGT stick vacuum with a powered brush head that Makita U.S.A. announced on July 7, 2026, and four months on the bare tool sells for US$364.71 at US dealers ToolUp and My Tool Store. That price does not include a battery or charger, so it is mainly a buy for cleaning crews and trades already running XGT tools.
What is it, and what changed from the GLC03?
The GLC04 is a compact, bagless cyclonic stick vacuum aimed at cleaning professionals who work in commercial and residential buildings. Its main change is the powered rotary brush in the floor head. Makita says that, with 110W of suction, it gives up to 2.75 times more pickup on carpet than the earlier GLC03, which Makita now lists as discontinued.
Smart Brush Roller Control spins the brush only when the head touches the floor, which Makita says saves run time and reduces wear. Four suction speeds sit on a push button, and Mode Memory restarts the vacuum at the last setting. The brush roll comes out without tools.

How do the specs look?
The figures below come from Makita’s GLC04M1 kit page and July press release.
| Spec | GLC04 |
|---|---|
| Suction power | 110W |
| Air flow | 35 CFM |
| Water lift | 80 in. |
| Run time | up to 96 minutes on a 4.0Ah battery |
| Dust capacity | 0.45 L (0.1 gal dry) |
| Cleaning width | 9 in. |
| Noise | 66 dB(A) high, 58 dB(A) low |
| Weight | 4.9 lb with battery, 4.2 lb without |
| Warranty | 3 year limited |
The 96 minute figure is Makita’s maximum with a 4.0Ah pack; Makita does not give run time for each speed, so expect less on the higher settings. The 0.45 L canister is small, so expect to empty it often on large floors.
Does it have a HEPA filter?
Not in the box, according to the product page. Makita’s July press release describes a two-stage HEPA filter that captures 99.97 percent of particles 0.3 microns and larger. The GLC04M1 kit page lists a 1915P0-4 High Performance Filter as included and says the vacuum becomes HEPA compatible only with the 1915P2-0 HEPA filter, sold separately.
If your contract, building or health needs call for HEPA filtration, budget for the 1915P2-0 and confirm the filter part number on the listing before you order.

How much does it cost?
On November 14, 2026, ToolUp and My Tool Store both listed the bare GLC04Z at US$364.71, with My Tool Store showing it in stock. Makita U.S.A. does not publish a list price, and no kit price for the GLC04M1 appeared in the sources read.
My Tool Store’s listing includes the powered brush nozzle, canister, High Performance Filter, powered extension pipe, a floor nozzle, a crevice tool and an extension attachment. A first time XGT buyer also needs a battery and a charger such as the DC40RA, which the GLC04M1 kit includes along with a BL4040 pack.
What should buyers know?
A stick vacuum is a cleaning tool, not a dust extractor. It suits carpet, hard floors and tidy ups at the end of a job, but it is not a substitute for a dust extractor connected to a saw or drill when you are making silica or fine dust.
Weight matters on long shifts. Makita’s 4.9 lb figure assumes a 4.0Ah battery, so a larger XGT pack adds weight. Filters are a running cost too, so check the price and availability of a spare 1915P0-4 or 1915P2-0 filter when you buy.

Who it suits
- Cleaning and facility crews already on XGT: the strongest case. The power brush, four speeds and long run time suit carpeted offices, and batteries are shared with other XGT tools. Check the canister size against the floor area you clean.
- Trades who leave a site clean: useful for carpets and tight spots at handover. Keep a proper dust extractor for drilling and cutting.
- Buyers who need HEPA filtration: the vacuum can take it, but the HEPA filter is an extra purchase. Confirm the 1915P2-0 is available where you buy.
- Homeowners outside the XGT system: the bare tool plus a battery and charger is a large outlay for a stick vacuum. A kit or a vacuum sold complete is the easier route.
- GLC03 owners: the GLC03 is discontinued, and the GLC04 adds the power brush that Makita says lifts far more from carpet. Makita’s 2.75 times claim is for carpet, so the gain on hard floors may be smaller.
What should you check next?
Compare the bare GLC04Z with the GLC04M1 kit at a Makita dealer in your country, and check the filter part number and whether a battery is included before you order.




