Tekton’s RIG stacking tool boxes start at $95 for a plain box, $240 for the 5-Drawer Tool Box and $590 for a 10-Drawer Tool Cart, all in US dollars on Tekton’s own site. The system is built on the L-BOXX Contractor platform, so it stacks with Bosch’s Contractor boxes rather than starting a new standard.

Tekton’s blog dates the launch to October 2026, in a post published October 29, and describes RIG as a mobile workstation rather than plain storage. ToolGuyd covered it on November 7 and called the line well thought out, while noting that plastic modular boxes will not replace steel roller cabinets.

What is in the RIG line now?

The line covers tool boxes in Lunar White and Slate Gray, foam organizers with tools, organizer bins, dividers, a 4-Wheel Dolly, a Mounting Plate, a Work Top and replacement latches. On November 14, Tekton’s RIG page listed 132 products across six pages.

The Rolling Tool Box ($195), shown as coming soon at launch, was marked New on that date. The 3-Drawer Tool Box ($225) was still marked Coming Soon with no date. Tekton says it expects more than 300 additional foam tool sets over time, and its own corner rail accessories in 2027.

Tekton RIG 5-Drawer Tool Box closed
Photo: Tekton

How much does it cost?

Tekton lists these prices in US dollars on its RIG page, checked on November 14. Shipping costs, taxes and availability outside the US are not covered by the sources.

Item Model Price
RIG Tool Box OLC11110 $95
RIG Rolling Tool Box OLC30110 $195
RIG 3-Drawer Tool Box (coming soon) OLC52310 $225
RIG 5-Drawer Tool Box OLC52510 $240
RIG 5-Drawer Tool Box with Organizer Bins RIG98105 $360
RIG 10-Drawer Tool Cart RIG99100 $590
Work Top OLC82000 $60
4-Wheel Dolly OLC81001 $80
Mounting Plate OLC81000 $50
Divider Set OLC98400 $18
310-Piece Tool Set with 5-Drawer Tool Box RIG99105 $1,575
558-Piece Tool Set with 10-Drawer Tool Cart RIG99110 $2,850

The 10-Drawer cart is two 5-Drawer boxes plus the dolly and work top, according to Tekton. Buying the parts separately comes to $620 at the listed prices, so the cart saves $30. Foam socket sets designed for the drawers run from $62 to $132 each on the same page.

RIG 5-Drawer Tool Box with one drawer pulled out
Photo: Tekton

What are the 5-Drawer Tool Box’s specs?

Tekton lists the 5-Drawer Tool Box at 22 in wide, 17 in deep and 18.7 in tall, weighing 33.3 lb empty. Each drawer measures 16.5 by 12.3 by 2.3 in inside, about 9 liters, and holds 39 lb on steel ball bearing slides with 120% extension. The slides are not soft close.

Load limit (Tekton) Rating
Each drawer, evenly loaded 39 lb
Whole 5-Drawer box 110 lb
Lid, top load 220 lb
Plain RIG Tool Box contents 77 lb
Dolly or Mounting Plate 440 lb
Each outside corner rail 16.5 lb

Two steel locking bars take a padlock to hold the drawers shut. Even without a padlock, a closed bar stops a loose drawer after 1.5 inches, which matters in a moving van. Tekton’s page says the box is made in Slovenia with drawer slides from China.

What are the limits?

Tekton warns that fully extending several loaded drawers at once can tip the box forward, so put heavy sockets low and open one drawer at a time. The 110 lb box limit means five drawers loaded to 39 lb each would exceed the rating.

Tekton also says the dolly is meant for hard floors, and recommends only one tool box per wall Mounting Plate. The 2.3 in drawer height suits sockets and hand tools in foam, not power tools. Tekton’s pages list no IP rating for RIG and no warranty terms, only a link to submit a warranty claim.

Work Top fitted on a RIG tool box
Photo: Tekton

Does it work with Bosch L-BOXX boxes?

Tekton says RIG is fully compatible with L-BOXX Contractor, and that original L-BOXX boxes can be mounted on top of RIG and Contractor boxes. Bosch describes its own L-BOXX Contractor line as IP65 rated, with aluminium side rails, and lists a Contractor Drawer 3 among its models.

These are Tekton’s own compatibility claims, and no source we found reports an independent stacking test. If you already own Contractor boxes, check the latch fit in person before buying several.

4-Wheel Dolly for RIG and L-BOXX
Photo: Tekton

How does it compare with Milwaukee PACKOUT?

PACKOUT is a separate system, so RIG boxes do not lock to PACKOUT. Milwaukee’s PACKOUT 3-Drawer Tool Box (48-22-8443) lists metal ball bearing slides, a 50 lb weight capacity and a limited lifetime warranty. Tekton has not published comparable warranty terms for RIG. The choice comes down to which boxes you already own and whether you want the drawers sized for Tekton’s foam socket sets.

Who it suits

  • Mechanics and auto techs: the drawers are sized for Tekton’s foam socket and wrench sets, and the locking bars keep drawers shut in transit. Check the tipping warning and keep heavy sets in the lower drawers.
  • Trades already on L-BOXX Contractor: RIG adds drawer units and a work top to boxes you own. Check the latch fit in person and note that RIG has no published IP rating, unlike Bosch’s IP65 Contractor boxes.
  • Van and truck owners: Tekton says the parts fit under most tonneau covers, and the 5-Drawer box is 18.7 in tall. Measure your bed height before ordering.
  • Home garage users: the 10-Drawer cart at $590 is a rolling chest without steel cabinet weight. The dolly is for hard floors, so it will not roll well across gravel or lawn.
  • PACKOUT owners: RIG will not lock to your boxes. Stay with PACKOUT drawers unless you want a second, separate stack.

Check the current prices and stock on Tekton’s RIG page before ordering, and read the tipping warning and load limits on the 5-Drawer Tool Box page.