The four best known hammer drill and impact driver kits list impact driver torque from 1,590 to 2,200 in-lbs, but battery size, box contents and price separate them more than torque does. With Black Friday on November 27, 2026, this guide compares the Milwaukee 3697-22, Makita XT288T, DEWALT DCK2101QQ2 and Ryobi PBLCK02K using maker spec pages and Pro Tool Reviews. Torque Digest did not test any of these kits.
What does a hammer drill add to a combo kit?
A hammer drill adds a percussion mode for drilling into brick, block and concrete, which a plain drill driver does poorly. Milwaukee describes the hammer mode on its 2904-20 for brick, block and concrete, and Ryobi lists up to 31,000 BPM for the hammer drill in the PBLCK02K.
Paired with an impact driver, one kit covers wall anchors, framing screws and large holes. If you only drive screws and drill wood, a plain drill driver kit is simpler and usually lighter.

What is in the box of each kit?
- Milwaukee 3697-22 (M18 FUEL): 2904-20 hammer drill driver, 2953-20 impact driver, two XC5.0 batteries, the 48-59-1812 M18 and M12 charger, a side handle, two belt clips and a blow molded case, according to Milwaukee.
- Makita XT288T (18V LXT): XPH14Z hammer driver-drill, XDT19Z 4-speed impact driver, two BL1850B 5.0Ah batteries, a DC18RC rapid charger and a tool bag, according to Makita USA.
- DEWALT DCK2101QQ2 (20V MAX XR): DCD1007 3-speed hammer drill, DCF845 3-speed impact driver, two DCB2104 4Ah batteries, a charger, a side handle, two belt hooks and a contractor bag, according to DEWALT.
- Ryobi PBLCK02K (18V ONE+ HP): 1/2 in. hammer drill and 1/4 in. impact driver with one 2Ah and one 4Ah battery, according to Ryobi’s listing, which does not show the rest of the box clearly.
Milwaukee and Makita ship two matched 5.0Ah packs. DEWALT ships two 4Ah packs, and Ryobi pairs a 4Ah with a 2Ah pack, so one of its batteries runs out first. Only the Milwaukee comes in a hard case.
How do the specs compare?
The table uses the Milwaukee, Makita USA, DEWALT and Ryobi product pages. Makers measure torque in different ways, so small gaps mean little.
| Kit | Batteries | Hammer drill torque | Impact driver torque | Impact top speed | Price seen |
|---|---|---|---|---|---|
| Milwaukee 3697-22 | 2 x 5.0Ah | 1,400 in-lbs | 2,000 in-lbs | 3,900 RPM | about $399 (Pro Tool Reviews) |
| Makita XT288T | 2 x 5.0Ah | 1,250 in.lbs | 1,590 in.lbs | not checked | not listed |
| DEWALT DCK2101QQ2 | 2 x 4Ah | 2,100 in-lbs max brake torque | 1,825 in-lbs | 3,400 RPM | not listed |
| Ryobi PBLCK02K | 4Ah + 2Ah | not listed separately | 2,200 in-lbs | not checked | $229.00 (Ryobi) |
The DEWALT drill figure needs care. DEWALT calls it a max brake torque and claims it is 50% higher than a leading competitor’s 18V and 20V hammer drills, but that is not the same measurement as the other makers’ maximum torque. Makita adds weights: 6.0 lbs for the XPH14 drill and 3.4 lbs for the XDT19 driver, each with a battery.
Milwaukee also lists a 6.9 inch long drill with a top speed of 2,100 RPM that can self-feed bits up to 2-9/16 inch in dense material, and a 4.47 inch impact driver. Makita’s XPH14 also tops out at 2,100 RPM.
Does battery size matter more than torque?
For most jobs it does, because amp hours decide how long a tool runs before a recharge. A 5.0Ah pack holds more charge than a 4Ah pack, and Makita says its BL1850B charges fully in 45 minutes or less.
DEWALT’s runtime claim for the DCD1007, up to 275 holes per charge, comes from tests with an 8Ah DCB2108 battery that is sold separately. With the kit’s 4Ah packs, expect fewer holes per charge than that headline figure.

Is the Makita kit still current?
The kit is still listed, but its impact driver is not. Makita USA marks the XDT19Z as discontinued and points to the XDT20Z, which lists the same 1,590 in.lbs. Makita’s newer XDT21, launched in August 2026, lists 1,860 in.lbs, but it is not part of this kit.
That does not make the XT288T a bad buy, since both drivers share the 18V LXT battery. It does mean you should check which impact driver is actually in the box you order.
What has Pro Tool Reviews said?
Pro Tool Reviews picks the Milwaukee 3697-22 as its best overall drill and impact kit, at about $399 with two 5Ah batteries. It credits the fourth generation tools with more torque and speed than their predecessors, praises Auto-Stop on the drill, and calls it the most expensive kit in its guide. Its guide carries no publish date and no measured test results.
For Makita it recommends a different kit, the XT268T, for similar performance, better ergonomics and a hard case, at a price a bit below Milwaukee. On Ryobi, it says the PBLCK02K adds a hammer drill and more modes for about $50 more than the compact PSBCK01K, which it puts at around $179. Ryobi’s own store lists the PBLCK02K at $229.00.
Who it suits
- Professional on M18: the Milwaukee brings Auto-Stop, two 5.0Ah packs and a hard case. Check the case size against your van storage, and buy bare tools instead if you already own M18 packs.
- Electrician or installer on LXT: the Makita has two 5.0Ah packs and a 3-year limited warranty on tool, battery and charger. Check the 6.0 lbs drill weight for overhead work and which impact driver model ships.
- DEWALT 20V MAX owner: the DCK2101QQ2 lists the highest drill torque figure, by DEWALT’s own method, and a 3-year limited warranty. Plan on larger packs if you drill masonry for long stretches.
- DIYer or homeowner on a budget: the Ryobi has the lowest price we could confirm and the highest listed impact torque. Check that a 2Ah pack is enough for your longest job.
- First time buyer: pick the platform whose other tools you will want next, then compare batteries and box contents before torque.
If you want the most complete kit for a working crew, start with the Milwaukee 3697-22. If you already own 20V MAX packs, the DEWALT fits, and the Ryobi suits the tightest budget.
Where should I check prices before Black Friday?
Open each maker page above for current kit contents, then compare your retailer’s price before November 27, since these kits are sold with several battery sizes and prices can change at any time. The Where to buy box lists the kits we could confirm.




