Milwaukee’s 2026 cordless SDS Max line splits into two jobs: the M18 FUEL 2917 and 2918 drill holes, while the M18 FUEL 3018 and the MX FUEL MXF365 only chip and break. Pick the job first, then the battery platform, because the MXF365 runs on a different battery system with a shorter warranty.

The four tools arrived across 2026. ToolGuyd’s February 5 report expected the 2918 in March and the 2917 in April; Power Tools Insider said the 2917 launched in April as a Home Depot exclusive. The MXF365 was due in June, and the 3018 kit slipped from June to November, per Power Tools Insider’s October 18 update. The first three are no longer new, so this is a buying guide rather than launch news.

Which hammers drill, and which only chip?

The 2917 and 2918 are rotary hammers for drilling anchor holes in concrete. The 3018 is a demolition hammer with no rotation: Milwaukee lists floor, wall and column chipping, tile scraping and ground rod driving in soft soil. The MXF365 is a heavier breaker for trenching and heavy breaking.

How do the specs compare?

Figures below come from Milwaukee’s product pages and press release unless the row says otherwise. Weights for the M18 tools come from the US retailer Tool Nut, because Milwaukee’s pages do not list them.

M18 FUEL 2917 M18 FUEL 2918 M18 FUEL 3018 MX FUEL MXF365
Type Rotary hammer Rotary hammer Demolition hammer Demolition hammer
Max bit capacity 1-9/16 in. 1-3/4 in. chipping only chipping only
Impact energy 6 ft-lbs 11 ft-lbs 11.4 ft-lbs (15.5 J) 26.1 J (19.3 ft-lbs)
Speed 488 RPM, 3,300 BPM 347 RPM, 2,625 BPM 2,625 BPM not listed
Weight not listed 17.4 lb bare, 21.4 lb with battery 17.4 lb bare, 20.5 lb with battery 27.6 lb
Kit battery 2 FORGE HD12.0 2 FORGE HD12.0 2 FORGE HD12.0 1 MX FUEL FORGE XC8.0
Warranty 5 yr tool, 3 yr battery 5 yr tool, 3 yr battery 5 yr tool, 3 yr battery 2 yr tool and battery

Two points stand out. The 2918 hits almost twice as hard as the 2917, at the cost of slower rotation, so the 2917 suits smaller holes drilled quickly and the 2918 suits larger anchors. Milwaukee gives an optimal range of 1/2 to 1-1/4 in. for the 2917 and 3/4 to 1-1/2 in. for the 2918. And the MXF365 delivers more than half again the 3018’s energy and Milwaukee lists it at 27.6 lb, against 20.5 lb for the 3018 with a battery fitted.

What changed from Milwaukee’s older SDS Max hammers?

The 2918 is a big step over the older M18 FUEL 1-3/4 in. rotary hammer, the 2718, which Milwaukee still lists at 8.1 ft-lbs, 2,900 BPM and 380 RPM. The 2918 trades blows per minute for 11 ft-lbs of impact energy.

All three M18 tools add VACLINK, which switches a compatible dust extractor on from the trigger, plus AVS anti-vibration and ONE-KEY tracking. The two rotary hammers also have AUTOSTOP kickback control.

How much do they cost?

Prices below are in US dollars from the sources named, and the date matters.

  • 2917: $599 bare (2917-20) and $949 for the 2917-22HD kit, per Power Tools Insider.
  • 2918: Tool Nut listed the 2918-22HD kit at $1,199.00 on November 14.
  • 3018: $1,299 for the 3018-22HD kit, per Power Tools Insider; Tool Nut showed the same price on November 14 but the kit out of stock, with 14 to 20 day shipping.
  • MXF365: Milwaukee’s press release lists the MXF365-1XC kit at $2,199, with one XC8.0 battery and a rapid charger.

A pair of FORGE HD12.0 packs is a large share of each M18 kit. If you already own high output M18 batteries, compare the bare tool price first.

What do the runtime claims mean?

Milwaukee says the 2917 drills over 24 holes of 7/8 in. by 6 in. per charge on a FORGE HD12.0, the 3018 removes about 1/3 ton per charge on the same pack, and the MXF365 chips up to 1.5 tons per charge on an XC8.0, which it equates to a 63 ft trench 4 in. deep or 33 minutes of trigger time. These are maker figures with different batteries and materials, so they show scale rather than a direct match.

What does the dust rule mean for chipping?

Milwaukee’s 3018 FAQ says the tool can meet OSHA rules when fitted with the 5318-DE SDS Max chipping boot, sold separately, and a Table 1 compliant dust extractor; water spray is another option it names. Budget for the boot and extractor if you work on regulated sites. VACLINK starts the extractor but does not replace it.

Who it suits

  • Electrical and mechanical crews drilling anchors: the 2917 is the lighter, faster spinning choice for holes up to about 1-1/4 in. If many of your holes are over 1-1/4 in., look at the 2918.
  • Concrete and structural crews: the 2918’s 11 ft-lbs suits larger anchors. Expect a 21.4 lb tool with the battery fitted.
  • Floor and tile removal crews on M18: the 3018 shares batteries with the rest of an M18 fleet and has the longer warranty. Add the chipping boot for dust control.
  • Heavy demolition and trenching: the MXF365 hits hardest, but it needs MX FUEL batteries and chargers and carries a 2 year warranty.
  • Occasional users: a $949 to $2,199 kit is a lot for one job. Compare with rental first.

Still unknown: independent drilling and chipping tests, and how quickly the 3018 reaches stores outside the US.

Next step: decide whether you drill or break, then compare the bare tool and kit prices on Milwaukee’s Where To Buy list for the model that fits, counting any batteries you already own.