Milwaukee’s M18 FUEL 18 lb SDS MAX demolition hammer kit, model 3018-22HD, costs $1,299 in the US with two FORGE HD12.0 batteries and a Rapid Charger, and there is no bare tool option. Milwaukee announced it in October 2026, according to The Crafty Catsman, after a delay from the June date Power Tools Insider first reported, and on November 14 Toolnut listed it as out of stock but available to order, usually shipping in 14 to 20 days.
Milwaukee rates it at 11.4 ft-lbs (15.5 J) of impact energy and says it hits harder than an 18 lb corded demolition hammer. It is a chipping tool only: it does not drill.
What does the kit cost, and is there a bare tool?
The only listed model is the 3018-22HD kit at $1,299, the price in Milwaukee’s US press release and on Toolnut. The Crafty Catsman, which covered the launch, notes that Milwaukee lists no tool only model, so owners who already have FORGE HD12.0 packs cannot buy the hammer alone yet.
The kit contains the hammer, two M18 REDLITHIUM FORGE HD12.0 batteries (48-11-1813) and an M18 and M12 Rapid Charger (48-59-1808). Milwaukee’s product images show a carrying case, but the official “In the Box” list on the US and Canadian pages does not include one, so confirm with your retailer. SDS MAX chisels and bits are sold separately.

What are the specs?
Milwaukee’s product page and press release give most of the figures below. Toolnut adds the blow rate and dimensions.
| Spec | Figure | Source |
|---|---|---|
| Impact energy | 11.4 ft-lbs (15.5 J) | Milwaukee |
| Blow rate | Up to 2,625 BPM | Toolnut, Power Tools Insider |
| Weight, tool only | 17.2 lb | Milwaukee (Toolnut lists 17.4 lb) |
| Weight with battery | 20.5 lb | Milwaukee, Toolnut |
| Length x height x width | 19.6 x 11.1 x 4.4 in | Toolnut |
| Motor | POWERSTATE brushless | Milwaukee |
| Speed settings | Four | Milwaukee |
| Warranty | 5 years tool, 3 years battery | Milwaukee |
Milwaukee also lists AVS anti vibration, a chisel lock with angle adjustment, an LED work light, VACLINK wireless dust control and ONE-KEY tracking. It claims over 1/3 ton of material removed per charge with the HD12.0 pack. These are maker figures, and none of the sources we read has published independent runtime or impact tests yet.
What jobs is it built for?
Milwaukee pitches it at small to medium chipping of 4 in or less, plus scraping tile off walls and floors. The Canadian page adds driving ground rods in soft soil with the SDS MAX side load ground rod driver, sold separately.
Milwaukee says it matches the power of its M18 FUEL 1-3/4 in SDS MAX rotary hammer but is tuned for chipping only. Power Tools Insider places it above the M18 FUEL rotary hammers, which drill and can do light chipping, and below Milwaukee’s 27 lb MX FUEL demolition hammer at $1,499, which it still recommends for heavier continuous demolition.
How long does the battery take to charge?
The FORGE HD12.0 is a 12 Ah pack, so recharge time matters on a long chipping day. Milwaukee’s product page gives these charge times:
| Charger | Time |
|---|---|
| SUPERCHARGER | 35 to 45 min |
| Rapid Charger (in kit) | 130 min |
| Standard charger | 231 min |
With two packs and the kit’s Rapid Charger, one pack charges while the other runs, provided each pack lasts more than about two hours of real work. Milwaukee has not published a runtime in minutes.
Does it meet silica dust rules?
Only with the right extras. Milwaukee’s FAQ says the 5318-DE SDS MAX chisel boot, sold separately, can help provide OSHA compliance when used with a Table 1 compliant dust extractor. The boot’s own page names the 29 CFR 1926.1153 silica rule, fits bull point and flat chisels up to 1-1/8 in wide, and says the Table 1 solution pairs it with Milwaukee’s 8960-20 8 gallon dust extractor.
VACLINK lets the hammer switch a compatible extractor on from the trigger. Milwaukee also lists water spray as another option for dust suppression.
When can you buy it?
Milwaukee’s pages still show no ship date. Power Tools Insider, updated October 18, said the kit ships in November 2026, with Acme Tools taking preorders and Home Depot not yet listing it. On November 8 Toolnut showed an estimated ship date of November 16. On November 14 the same listing showed the kit out of stock but available to order, usually shipping in 14 to 20 days.
The pricing in this story is for the US. Milwaukee’s Canadian page lists the same kit without a price, and no other market is named in the sources.
Who it suits
- Concrete and demolition crews already on M18: no cord or generator, and the HD12.0 packs work in other M18 tools. At 20.5 lb with a battery it is still heavy overhead. Budget for the 5318-DE boot and a Table 1 extractor if silica rules apply.
- Electricians and plumbers chipping chases in walls and floors: the 4 in chipping range suits that work. Check that your chisels are SDS MAX, and that you need chipping rather than drilling, which this tool cannot do.
- Renovation contractors removing tile: tile scraping is one of Milwaukee’s named jobs. Price a wide scaling chisel, since none is included.
- Fleet buyers: the lack of a bare tool means every unit comes with two HD12.0 packs and a charger. Check whether that suits a fleet that already has packs.
- Homeowners with one job: $1,299 is a specialist purchase. Compare it with a rental first.
Watch the 3018-22HD listing at your usual Milwaukee dealer for a confirmed ship date, and check Milwaukee’s product page for a bare tool model if you already own HD12.0 packs.




