Picking a cordless oscillating multi-tool mostly comes down to the battery you already own, how fast the blade swings and which blades the clamp accepts. The newest of the three here is the DEWALT DCS359, which Power Tools Insider reports reached Lowe’s the week of October 18, 2026 at US$249 bare. The Milwaukee 2836-20 and Makita XMT04ZB have been on sale since 2021, and on November 14, 2026 retailers listed them at US$249 and US$269. Torque Digest did not test any of them; results below are attributed to the outlets that ran them.

What is new about the DEWALT DCS359?

It replaces the DCS356, according to Power Tools Insider, and moves to a two piece housing that isolates the head from the grip. DEWALT claims up to 43% less vibration than the leading competitor, based on its own test with a DCBP034 battery while plunge cutting chipboard at top speed.

The tool has a 4.2 degree oscillation angle, a 4 Mode Speed Lock, a variable trigger and a tool free Quick-Change clamp that DEWALT says fits most oscillating blades. Power Tools Insider describes the mount as universal OIS and reports DEWALT’s 20,000 OPM top speed, a figure DEWALT’s own page does not list.

The older DCS356B is still around, and Power Tools Insider saw it at about US$99 on Amazon. That makes the outgoing model the budget pick for DEWALT owners who do not need the new vibration control.

Makita XMT04ZB 18V LXT StarlockMax oscillating multi-tool product photo
Photo: Makita USA

How do the three compare on paper?

The table uses each maker’s product page, with weights from Pro Tool Reviews and the DEWALT weight from Toolnut’s listing, which does not say whether a battery is included.

DEWALT DCS359B Milwaukee 2836-20 Makita XMT04ZB
Platform 20V MAX XR M18 FUEL 18V LXT
On sale since October 2026 2021 September 2021
Speed 20,000 OPM top (DEWALT, via Power Tools Insider) 10,000 to 20,000 OPM 10,000 to 20,000 OPM
Oscillation angle 4.2 degrees 4.2 degrees 3.6 degrees
Speed control 4 Mode Speed Lock plus trigger 10 setting dial with Auto-Load Variable dial with soft start
Blade mount Quick-Change clamp, universal OIS Lever and threaded bolt StarlockMax, also Starlock and StarlockPlus
Bare weight 3.35 lb (Toolnut) 2.56 lb 3.0 lb
Warranty 3 years, 1 year free service 5 years tool 3 years

Sources differ on Milwaukee’s speed: Milwaukee lists 10,000 to 20,000 OPM, while Tool Box Buzz printed 11,000 to 18,000 OPM. Check the current spec sheet if top speed matters to you.

DEWALT DCS359B oscillating multi-tool seen from another angle
Photo: DEWALT

What did reviewers find?

Pro Tool Reviews scored the Milwaukee 2836 at 9.6 out of 10. It found cutting speed roughly on par with the Fein SuperCut cordless and vibration control bettered only by Milwaukee’s own M12 FUEL model. Its weak point was the blade change, which took 2:17 in the outlet’s time trial and placed near the bottom of the group.

Tool Box Buzz named the 2836 its best overall cordless multi-tool of 2021 among 12 tools, with cut times far ahead of the field. It also ranked the Milwaukee 10th of 12 for noise and near the bottom for blade changes.

Pro Tool Reviews gave the Makita XMT04 a 9.4 out of 10 and called its vibration control the best it had used, with almost nothing reaching the hands at full speed. Makita cites an 85% vibration reduction over the older XMT03. The outlet’s complaints were a bulky head, a short barrel and a Starlock clamp that still needs the bolt pulled by hand.

We found no independent cutting or vibration measurements for the DCS359 that we could verify, so DEWALT’s 43% figure is the maker’s claim only.

Which blade system should you plan around?

The blade mount often decides the running cost more than the body. Makita’s StarlockMax clamp takes StarlockMax, StarlockPlus and Starlock accessories without tools, which gives the widest range of quick change blades.

DEWALT’s universal OIS style clamp suits a drawer of mixed blades from many brands. Tool Box Buzz says the Milwaukee accepts OIS and One-Fit blades plus Starlock blades that also carry the OIS cutout, and Pro Tool Reviews notes that blades without a cutout need the bolt fully removed each time.

DEWALT DCS359B head with the Quick-Change clamp
Photo: DEWALT

How much does each cost?

On November 14, 2026, Toolnut listed the DCS359B at US$229 on sale from US$249, Ace Tool listed the 2836-20 at US$249 and Toolnut listed the Makita XMT04Z at US$269, out of stock. Power Tools Insider saw the DCS359E1 kit, with a 1.7Ah battery, charger, two blades, a sanding platen and a depth guide, at US$299 on Amazon.

When Pro Tool Reviews reviewed them, the Milwaukee was US$229 bare or US$329 with a 5.0Ah battery, and the Makita was US$229 bare. All three bare tools need a battery and charger, so a first time buyer should compare kits.

Who it suits

  • DEWALT 20V MAX owners: the DCS359B adds the 4 Mode Speed Lock and DEWALT’s lower vibration claim. Wait for independent tests if vibration is why you are upgrading, or take the older DCS356 if price matters more.
  • Milwaukee M18 owners: the 2836-20 has the strongest published cutting results and the longest tool warranty here. Expect slower blade swaps and plan on hearing protection.
  • Makita 18V LXT owners: the XMT04ZB has the best reviewed vibration control and the widest Starlock support. Accept a slightly lower angle and a bulkier head.
  • Remodel, tile and flooring crews: choose by blade system first. Starlock suits crews that swap blades all day, while OIS style mounts suit mixed accessory drawers.
  • First time buyers: buy into the platform of your drill or impact driver. The DCS359E1 kit is a complete starting point at US$299 where Power Tools Insider saw it.

If you already own one of these batteries, the matching tool is the sensible choice; compare the bare price with the kit at your usual store before you buy.