A heated work jacket from Milwaukee, DEWALT or Makita costs roughly US$110 to US$290 in the US, and the battery you already own decides most of that bill. On November 14, 2026, a bare DEWALT heated hoodie listed at US$108.83 at The Home Depot, while a Milwaukee jacket kit with a battery and charger listed at US$194.00 at Max Tool.

This guide compares four current models: the Milwaukee M12 Heated AXIS Jacket Kit (M102B-21M), the DEWALT Heavy Duty Black Heated Work Jacket Kit (DCHJ076ABD1), the DEWALT 20V MAX Black Heated Hoodie (DCHJ067B) and the Makita 18V LXT High Visibility Heated Jacket (DCJ206Z).

How do the four compare on paper?

The table below uses each maker’s product page, with US prices from the retailer listings named in the next section. Runtime claims assume different batteries, so treat them as a rough guide only.

Milwaukee M102B-21M DEWALT DCHJ076ABD1 DEWALT DCHJ067B Makita DCJ206Z
Platform M12 20V MAX 20V MAX 18V LXT
Sold as kit: CP3.0 battery, TOP-OFF charger, USB-C cable kit: 20V MAX battery, charger, USB adapter hoodie with DCB091 USB adapter, no battery jacket only
Heat zones 3: chest, back, shoulders 5: left and right chest, both arms, mid back 3: upper left and right chest, mid back 5: left and right chest, back, both pockets
Runtime claim (low) up to 12 hours not listed by DEWALT up to 7 hours on a 1.5Ah pack up to 37.5 hours on an 18V 5.0Ah or 6.0Ah pack
Shell ripstop polyester, DWR finish water and wind resistant duck wind resistant cotton and polyester polyester, high visibility with reflective tape
Washing washer and dryer safe not stated not stated washer and dryer safe
Warranty not stated on page 1 year limited 1 year limited 3 years, heating element and electronics
US price seen Nov. 14, 2026 US$194.00 (Max Tool) US$234.99 (Home Depot) US$108.83 (Home Depot) US$218.75 (Home Depot)

Makita’s own page is not consistent about the battery behind its 37.5 hour claim: one line cites a 6.0Ah pack and another a BL1850 (5.0Ah). Either way, that battery is sold separately.

DEWALT 20V MAX black heated hoodie with USB power source
Photo: DEWALT

Which one is new, and what changed?

Only the Milwaukee has a recent redesign on record. Milwaukee’s press release lists the next generation M12 Heated AXIS Jacket (M102) for August 2024 at US$229.99, with HEXON heating that Milwaukee says covers 40 times more area in the same footprint, maximum heat in under two minutes, twice the insulation of the previous AXIS and a bundled M12 TOP-OFF power supply that can also charge a phone over USB-C.

Milwaukee also sells a separate Heated Gear Power Source with App Control (US$99.99 at launch) that adds 10 heat levels and per zone control from a phone. The DEWALT and Makita pages give no launch dates, so check the model number on any listing matches the one above.

How much will you really spend?

For someone with no batteries, the kits are the cheapest way in. The Milwaukee kit at US$194.00 and the DEWALT jacket kit at US$234.99 include everything needed to switch on. Zoro listed the same DEWALT kit at US$289.99 the same day, which shows how far prices for one model can spread between stores.

The DEWALT hoodie and Makita jacket only make sense if you already own that maker’s batteries and a charger. The Home Depot listing for the DEWALT jacket kit is itself inconsistent, quoting up to 9 hours on low in one place and 7 hours in another, so read the runtime line on the exact listing you buy from.

Makita 18V LXT heated jacket with hood and reflective stripes
Photo: Makita

What should you know before buying?

The high setting is where batteries go quickly. Milwaukee’s own figures show it plainly: 12 hours on low drops to 6 on medium and 3 on high. Plan to warm up on high and then drop to low, and carry a second pack on long, cold shifts.

Zone placement matters more than the number of zones. Arm zones suit work done with hands out in front, chest and back zones keep the core warm, and Makita’s pocket zones suit anyone who stops to warm their hands between tasks. Check the size chart too, and whether you will wear it under a shell or as the outer layer.

Washing instructions differ. Milwaukee and Makita say their jackets are washer and dryer safe; the DEWALT pages read do not give care instructions, so follow the label inside the garment.

Who it suits

  • M12 owners: the Milwaukee kit is the simplest choice, and any M12 battery fits. Check the size chart, since the kit is sold by size, and whether the US$99.99 app power source is worth it for you.
  • 20V MAX owners who want a light layer: the bare DEWALT hoodie is the cheapest option here. Its 7 hour claim assumes a small 1.5Ah pack, and DEWALT says runtime varies with battery and setting.
  • 20V MAX owners who work outdoors all day: the DEWALT duck jacket adds arm heat and a heavier shell. Note its 1 year warranty against Makita’s 3 years.
  • 18V LXT owners and road or site crews: the Makita is the only high visibility jacket here and has the longest runtime claim. Confirm whether your site requires a certified high visibility class, which the pages read do not state.
  • First time buyers with no batteries: choose a kit, Milwaukee or the DEWALT jacket, so the battery and charger are included.
  • Crew buyers: standardise on one battery platform, and check sizes and care labels before ordering in volume.

What should you check next?

Open the maker page for the exact model and size you want, read the kit contents line by line, then compare the price at two or three stores in your market, since the same jacket kit can differ by about US$55 between US retailers on the same day.