Makita’s GT202SU1D1 kit costs about the same as its two tools bought bare: JLC put the kit at US$500 against US$260 for the GPH03 hammer drill and US$230 for the GDT04 impact driver. That makes the kit, which adds two batteries and a fast charger, the cheapest way into Makita’s 40V max XGT drills if you do not own XGT packs yet.

It is not new. Makita announced the kit on February 3, 2026, so this is a guide to whether it is still the right buy nine months on.

What is in the box?

Makita’s kit page lists the full contents:

  • GPH03Z 3-speed 1/2 in. hammer driver-drill
  • GDT04Z high torque 4-speed impact driver
  • BL4040F 4.0Ah High Power battery
  • BL4025 2.5Ah battery
  • DC40RC fast charger
  • Tool bag

Makita’s February press release names only the 4.0Ah battery, but the kit page, the model name and Power Tools Insider all include the 2.5Ah pack as well. Check that a listing shows both before you pay.

Makita GPH03Z 40V max XGT hammer driver-drill with side handle
Photo: Makita U.S.A.

What changed from the older XGT drill and driver?

The hammer drill gained torque and a third gear. The GPH03 is rated at 1,590 in.lbs. with three speeds, while Pro Tool Reviews lists the earlier GPH01 at 1,250 in.lbs. with two. Power Tools Insider describes the GPH03 as the GPH01’s replacement as Makita’s top XGT hammer drill, and Makita now marks the older GDT01 impact driver as discontinued.

The table below uses Makita’s figures for the new tools and Pro Tool Reviews’ spec list for the GPH01.

GPH03 (in this kit) GPH01 (previous)
Max torque 1,590 in.lbs. (180 N.m) 1,250 in.lbs.
Speeds 0 to 650, 0 to 1,800, 0 to 2,400 RPM 0 to 650, 0 to 2,600 RPM
Length 7-3/4 in. 7-1/8 in.
Clutch 41, 30 and 21 settings by gear Not compared

Note one inconsistency: Makita’s spec tables give the top speed as 2,400 RPM, while its press release and the kit page’s text say 2,600 RPM. Check the manual if top speed matters to you.

The GDT04 impact driver is rated at 2,040 in.lbs. across four speeds up to 3,900 RPM, with a tightening mode for self drilling screws in thin sheet metal. It is 5-3/8 in. long.

How do they perform?

The most detailed hands on report we found is JLC’s tool test, published September 24, 2026 and written by a working contractor. He found the GPH03 smoother than the GPH01, with a softer start, better speed under load and better heat management during long boring sessions, though slower at top speed.

The same test found the GDT04 starts screws more cleanly with less cam out, but is about 1/2 in. longer than the GDT01. Both tools are slightly bigger and heavier than the previous generation. Makita lists the GPH03 at 6.2 lbs. with a battery; it does not give a matching weight for the GDT04.

For context on the previous drill, Pro Tool Reviews scored the GPH01 9.5 out of 10 and found it faster than Makita’s 18V XPH14 in its drilling tests, while noting a chuck that could slip.

How much does it cost?

Makita lists no price and points buyers to its dealer finder. On November 14, 2026, Acme Tools listed the kit at US$499.00 but showed it as backordered. JLC gave US$500 for the kit, US$260 for the bare GPH03 and US$230 for the bare GDT04.

Those figures are US prices in US dollars. Makita sells XGT tools in other regions under its own model numbers, so check your local Makita site for the equivalent kit.

What should you weigh before buying?

The kit commits you to 40V max XGT. Power Tools Insider notes that XGT has a higher entry cost and fewer tools than Milwaukee’s M18 FUEL or DEWALT’s FLEXVOLT, and XGT batteries do not fit Makita’s 18V LXT tools.

The size is the other trade off. A larger impact driver is harder to fit between studs and joists, and the hammer drill is not a light tool for overhead work.

The battery charge time is also unclear. Makita’s kit page says the 4.0Ah pack charges in 70 minutes or less while a badge on the same page shows 45 minutes; the 2.5Ah badge shows 28 minutes. All three items carry a 3 year limited warranty.

Who it suits

  • Professional tradesperson moving to XGT: two batteries and a charger for roughly the price of the bare tools make this the cheapest start. Check whether the larger GDT04 fits the tight spaces you work in.
  • Already on XGT: you may not need more batteries. Compare the bare GPH03 and GDT04 prices against the kit, because the price gap is small either way.
  • Already on Makita 18V LXT: XGT packs will not run your LXT tools. Decide whether you need 1,590 in.lbs. before you start a second platform.
  • Serious DIYer: the hammer drill handles masonry anchors and large bits, but this is more power and weight than most household jobs need.
  • First time buyer: the kit is complete, but hold both tools in a store first, because both grew in size and weight.

If you are starting on XGT, compare the kit price with the two bare tools at two dealers, and confirm the listing includes both the 4.0Ah and 2.5Ah batteries.