If you are buying your first cordless drill and impact driver, the battery platform you pick matters more than either tool, because every later purchase will run on it. These four compact brushless kits from Milwaukee, Makita, DEWALT and Ryobi are all established models, not new launches, and on November 14, 2026 their US store prices ran from $139.00 to $294.99. The biggest practical difference is the battery in the box.
What is in each kit?
All four pair a 1/2 inch drill with a 1/4 inch hex impact driver, two batteries, a charger and a bag. The table uses the makers’ pages, with Zoro confirming the Milwaukee battery size.
| Kit | Drill | Impact driver | Batteries | Extras |
|---|---|---|---|---|
| Milwaukee 3692-22CT | 3601-20 | 3650-20 | Two CP2.0 (48-11-1820), 2.0Ah | M18 and M12 multi-voltage charger, contractor bag |
| Makita XT281S | XFD13Z | XDT13Z | Two BL1830B, 3.0Ah | DC18SD charger, tool bag |
| DEWALT DCK227D2 | DCD793 | DCF840 | Two DCB203, 2.0Ah | Charger, kit bag, two belt hooks |
| Ryobi PSBCK01K (discontinued) | 1/2 in compact drill/driver | 1/4 in compact impact driver | Two 1.5Ah compact packs | Charger, bag |
Makita says its 3.0Ah packs reach full charge in 30 minutes or less. That is 50% more capacity per pack than the 2.0Ah kits, which matters most for the impact driver on long runs of deck or framing screws.

How do the tool ratings compare?
The impact drivers are close on paper, while the drills differ more. These are each maker’s own ratings under its own conditions, not a lab comparison.
| Kit | Drill rating | Drill speed | Impact max torque | Impact speed |
|---|---|---|---|---|
| Milwaukee 3692-22CT | 550 in-lbs | 0-500 / 0-1,700 RPM | 1,700 in-lbs | 0-3,600 RPM |
| Makita XT281S | 440 in.lbs | 0-500 / 0-1,900 RPM | 1,500 in.lbs | 0-3,400 RPM, 0-3,600 IPM |
| DEWALT DCK227D2 | 404 UWO | Up to 1,650 RPM | 1,700 in-lbs | Up to 3,200 RPM |
| Ryobi PSBCK01K | 400 in-lbs | 0-450 / 0-1,700 RPM | 1,700 in-lbs | Up to 2,900 RPM, 3,800 IPM |
DEWALT rates the DCD793 in unit watts out, so its 404 cannot be set against the others’ inch pounds. DEWALT says it gives up to 16% more power than its older DCD771. For a homeowner, any of these drills will handle pilot holes, cabinet hardware and small hole saws; the 550 in-lbs Milwaukee has the most reserve for spade bits in framing lumber.
Which kit is smallest and lightest?
Milwaukee lists the shortest tools: 5.7 inches for the drill and 4.4 inches for the impact driver, with the drill at 2.3 lbs bare. DEWALT lists 6.38 and 5.15 inches, and Pro Tool Reviews gives the Ryobi drill as 6.4 inches long.
Makita lists 3.6 lbs for its drill and 3.3 lbs for its impact driver, both with a 3.0Ah battery, so it is not comparable with bare weights. Short tools matter most between studs and inside cabinets, where a long impact driver will not fit square to the screw.

What do the kits cost now?
These are the US dollar prices the listed stores showed on November 14, 2026. Kit prices move often before Black Friday, so treat this as a snapshot.
| Kit | Store | Price shown |
|---|---|---|
| Milwaukee 3692-22CT | Zoro | $190.99 (was $249.99) |
| Makita XT281S | Zoro | $294.99 |
| DEWALT DCK227D2 | Toolnut | $208.79 (regular $260.99, in stock) |
| Ryobi PSBCK102K2 (replacement) | Ryobi | $139.00 (was $179.00) |
For context, ToolGuyd saw the DEWALT DCK227D2 at $169 in June 2024 and ranked it second among four DEWALT kits, ahead of the older brushless DCK277D2 at the same price. Pro Tool Reviews named the Ryobi PSBCK01K its best value kit at about $179.
What happened to the Ryobi kit?
Ryobi’s page now marks the PSBCK01K discontinued. Its current compact kit is the PSBCK102K2 at $139.00, which Ryobi describes as its most compact and lightest kit, with a two speed drill giving up to 450 in-lbs and up to 1,700 RPM. Ryobi’s page does not list the battery size in the box, so check that on any listing before you compare it with the others.
Is the DEWALT the same as the Atomic kit?
No. Pro Tool Reviews’ lightweight pick is the DCK254E2 Atomic kit with a DCD709 drill, a DCF850 impact driver and 2.0Ah PowerStack packs. ToolGuyd preferred the DCK225D2 Atomic kit by a slim margin over the DCK227D2, but noted the DCK227D2’s DCF840 impact driver was its favourite of that group.

How do warranty and platform differ?
DEWALT gives each tool a 3 year limited warranty, and Makita’s 3 year limited warranty covers tool, battery and charger. Milwaukee’s kit page links to its warranty page without stating a term, and Ryobi’s pages link only to a general warranties page.
Pro Tool Reviews counts the depth of each maker’s 18V and 20V lineup as a buying factor. Milwaukee’s charger also takes M12 packs, a plus if you expect to add M12 tools.
Who it suits
First time buyer or homeowner on a budget: the Ryobi PSBCK102K2 at $139.00 is the cheapest entry. Check the battery size, because the older kit shipped with small 1.5Ah packs.
Serious DIYer: Makita’s 3.0Ah packs give the longest run between charges. It was also the most expensive kit in our check, so watch for a sale.
Professional tradesperson: Milwaukee has the highest drill rating and shortest impact driver, and its charger covers M12 too. Its 2.0Ah CP packs favour light weight over runtime, so plan on larger packs for heavy drilling.
Someone already on a platform: buy the bare tools instead of a kit. None of the maker pages we read lists bare tool prices, so compare at your usual store.
Crew or fleet buyer: DEWALT includes two belt hooks and per tool warranties, and ToolGuyd rated its DCF840 impact driver highly. Ask your supplier for drill torque in in-lbs if your crew compares tools that way.
What should you check before you order?
Match the exact kit number and battery Ah on the listing to the maker’s page, because near identical kits with smaller or older tools sell at similar prices, then check which warranty applies in your country.




