Makita’s new XWT20 is a 1/2 in. impact wrench for 18V LXT owners who want something small enough for engine bays and cabinets: 5 1/8 in. long and 3.2 lb with a 3.0Ah battery. Makita U.S.A. announced it on November 3, 2026, and the bare XWT20Z appeared as a US$169 pre-order at Acme Tools, according to SlashGear and Power Tool Insider.

What does the XWT20 do?

The XWT20 is a compact, single speed brushless impact wrench meant for loosening and running down nuts and bolts in tight places. Makita aims it at automotive technicians, general contractors, HVAC installers and maintenance crews.

Makita’s product page for the XWT20Z lists these figures:

Spec XWT20Z
Drive 1/2 in. square
Nut-busting torque 300 ft.lbs. (400 N·m)
Fastening torque 180 ft.lbs. (250 N·m) in the spec table, 170 ft.lbs. elsewhere on the page
Speed 0 to 2,300 RPM
Impacts 0 to 3,200 IPM
Length 5 1/8 in.
Weight 3.2 lb with battery
Warranty 3 year limited

It also has an LED light with preglow and afterglow, a rubberized grip and Star Protection, Makita’s tool to battery link that guards against overloading, over-discharging and overheating. Power Tool Insider adds that it carries Makita’s XPT dust and water protection.

Makita XWT20 impact wrench seen from another angle
Photo: Makita U.S.A.

Why do the torque numbers not match?

Makita’s own press release swaps the two torque figures, giving 300 ft.lbs. for fastening and 170 ft.lbs. for nut-busting. The product page spec table, SlashGear and Power Tool Insider all put 300 ft.lbs. as the nut-busting figure, with 170 or 180 ft.lbs. for fastening.

That reading also fits how impact wrenches are usually rated, with breakaway torque higher than fastening torque. Until Makita corrects the release, treat 300 ft.lbs. as the most it will do to break a nut loose, and check the manual before relying on it for wheel lug nuts.

How much does it cost and when can you buy it?

The only price on record is US$169 for the bare tool as a pre-order at Acme Tools, reported by SlashGear on November 5 and Power Tool Insider on November 8. Makita has not published a list price or a ship date, and Power Tool Insider describes the US$169 as a pre-order figure rather than a settled street price.

The XWT20Z comes without a battery or charger. If you are new to 18V LXT, budget for at least one battery and a charger; Makita’s 3.2 lb weight figure assumes a 3.0Ah pack, so a larger pack adds weight.

How does it compare with Milwaukee and DEWALT compacts?

The XWT20 is lighter on power than the leading compact rivals, but simpler. Milwaukee’s page for its M18 FUEL 1/2 in. Compact Impact Wrench (2855-20) lists 250 ft.lbs. of nut-busting torque, a 4.9 in. length and four DRIVE CONTROL modes, including an auto shut-off mode for hand tight work and a bolt removal mode.

Pro Tool Reviews lists DEWALT’s ATOMIC 20V MAX 1/2 in. impact wrench (DCF921) at 450 ft.lbs. of breakaway and 300 ft.lbs. of fastening torque, 2,500 RPM, 3,550 IPM and 4.97 in. long, at US$199 bare. In its testing the DCF921 consistently removed 450 ft.lbs. with a 5.0Ah battery.

Makita XWT20Z Milwaukee 2855-20 DEWALT DCF921
Nut-busting / breakaway 300 ft.lbs. 250 ft.lbs. 450 ft.lbs.
Length 5 1/8 in. 4.9 in. 4.97 in.
Speed modes 1 4 not stated in the sources read
Bare tool price seen US$169 pre-order not listed by Milwaukee US$199 (Pro Tool Reviews)

Figures come from Makita, Milwaukee and Pro Tool Reviews as named above. The XWT20’s single speed means no built-in setting to stop it overdriving small fasteners, which the Milwaukee offers, so go gently on the trigger with small bolts.

Makita XWT20 impact wrench, rear view
Photo: Makita U.S.A.

Does it work with my batteries?

Yes, if they are Makita 18V LXT slide packs. Makita says the tool works with LXT batteries, and those marked with a star symbol add Star Protection.

Who it suits

  • Automotive technicians on LXT: the short 5 1/8 in. body helps in engine bays and wheel wells. Check that 300 ft.lbs. of breakaway is enough for the suspension and wheel fasteners you meet; it is lower than the DEWALT DCF921.
  • HVAC installers and general contractors: light weight and a work light suit installation jobs. The bare price is modest if you already own LXT packs.
  • Maintenance and MRO crews: a shared battery platform keeps costs down, and Makita lists a 3 year limited warranty. Wait for a confirmed ship date before planning a fleet order.
  • First time buyers: the bare tool price looks low, but batteries and a charger add to it. Compare the total against a kit from a platform you may already prefer.
  • Anyone who needs speed control: the single speed setting is a real limit. The Milwaukee 2855-20’s four modes may suit delicate fasteners better.

What should you check next?

Check the XWT20Z page at makitatools.com for a corrected torque line and the first ship date, and compare the pre-order price with other Makita dealers once more stores list it.