Makita’s XNB09Z is an 18V LXT brushless metal connector nailer that drives 30 to 35 degree paper-collated nails from 1-1/2 inch to 2-1/2 inch long, with no compressor or hose. Makita announced it in a press release dated August 4, 2026, and lists it as a tool only, so the battery and charger are extra. Makita has not published a price or Canadian availability.

What nails does the Makita XNB09Z drive?

According to Makita’s product page, the XNB09Z takes 30 to 35 degree paper-collated metal connector nails, 1-1/2 inch to 2-1/2 inch long, with a shank diameter of .131 inch to .162 inch. The rear lock-and-load magazine holds 31 nails.

Makita rates the tool at up to 1,000 nails per charge on its BL1860B 6.0Ah battery, which Makita says recharges in 55 minutes or less. That is the maker’s figure, not an independent test result.

What features does it have?

Makita lists tool-less depth adjustment, an anti-dry fire mechanism, a built-in LED work light and a rubberized soft-grip handle. The nail guide is 50% longer, which Makita says helps line nails up with connector holes.

The tool weighs 11.5 lbs with a 6.0Ah battery and 10 lbs without, according to Makita. The box includes a belt hook, rafter hook, nose adapter, hex wrench and a tool case. Star Protection electronics guard against overload, over-discharge and overheating on star-marked 18V LXT batteries, and the tool carries a 3-year limited warranty.

Who it suits

  • Framing and deck crews on LXT: it removes the compressor and hose, and runs on batteries they may already own. They should check that their batteries carry the Star Protection mark.
  • Serious DIYers building decks or sheds: it suits joist hangers and framing connectors, but at 10 lbs bare it is a heavy tool, so try the weight in a store first.
  • First time buyers: the battery and charger are sold separately, so add that cost before comparing with a pneumatic nailer.
  • Crew buyers: confirm nail compatibility with your connector brand against the 30 to 35 degree, 1-1/2 inch to 2-1/2 inch range.

Should you buy or wait?

Buy now only if you already own 18V LXT batteries and need to drive connector nails often. Wait if you are in Canada: Makita’s pages are US pages and do not state Canadian pricing or stock. Ask a Canadian Makita dealer for the XNB09Z, then compare the nail range on the Makita product page with the connectors you use before ordering.