DEWALT has added two compact 50-piece mechanics sets, the 1/4 in. drive DWMT45422 and the 3/8 in. drive DWMT45423, built around a low profile ratchet with a head DEWALT says is 20% thinner than its older ratchets. ToolGuyd spotted them on November 6 at $34 for the 1/4 in. set and from $57 for the 3/8 in. set, but other stores list them for much more, so the price you pay depends on where you look.
What is new about these sets?
The ratchet is the main change. DEWALT’s product pages compare the new heads with two existing ratchets: the 1/4 in. head is 20% thinner than the DWMT81096 and the 3/8 in. head 20% thinner than the DWMT81097. A thinner head fits between a hose and a bracket, or behind a panel, where a standard head would not.
The ratchet still uses a 72-tooth mechanism with a 5-degree arc swing, the same figures Toolnut lists for the older DWMT81096. So the gain is in the head’s height, not in a finer swing. A quick-release lever, anti-slip grooves on the handle and chrome vanadium steel round out the spec, and DEWALT says the sets meet or exceed ANSI/ASME standards.
ToolGuyd describes the sets as a new mixed assortment in a molded case that looks a lot like DEWALT’s older accessory cases.

What is in each set?
Both sets share the same frame: one low profile ratchet, 3 in. and 6 in. extensions, a spinner handle, a bit adapter and 22 bits. The difference is the drive size and the sockets. Here is the breakdown from the DEWALT product pages:
| Set | Drive | Sockets | Extras |
|---|---|---|---|
| DWMT45422 | 1/4 in. | 23 sockets | 2 extensions, spinner handle, bit adapter, 22 bits |
| DWMT45423 | 3/8 in. | 22 sockets plus a spark plug socket | 2 extensions, spinner handle, bit adapter, 22 bits |
DEWALT lists the socket sizes only as assorted. Toolnut’s listings say both sets cover SAE and metric, and ToolGuyd says the 1/4 in. set uses 6-point sockets with hex bits. Nobody has published the exact size list yet, and DEWALT does not give the spark plug socket size.
How does it compare with DEWALT’s older 50-piece set?
It looks like a refresh with a better ratchet. DEWALT already sells the DWMT81610, a 50-piece 1/4 in. set with the same mix on paper: 23 six-point sockets, a 72-tooth ratchet, a spinner handle, 3 in. and 6 in. extensions, a bit adapter and 22 bits. Its page lists the sockets in full:
| DWMT81610 sockets | Sizes |
|---|---|
| Metric (12) | 4, 4.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm |
| SAE (11) | 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in. |
DEWALT has not said the DWMT45422 uses the same sockets, so treat this as a guide to what a DEWALT 50-piece 1/4 in. set has covered, not a confirmed list. The main difference you can verify is the ratchet: the older set’s pear head ratchet against the new low profile head.
DEWALT also lists bigger sets with the same ratchet, such as the 84-piece DWMT45424 with 61 sockets in 1/4 in. and 3/8 in. drive and two spark plug sockets, for anyone who wants both drives in one case.

How much do they cost?
Prices differ a lot by store. ToolGuyd gave $34 for the 1/4 in. set and $57 and up for the 3/8 in. set on November 6, with links to Home Depot, Amazon and Acme Tools. On November 14, Toolnut listed the DWMT45422 at US$54.99 and the DWMT45423 at US$71.99, both shown as out of stock and available to order.
For scale, Toolnut lists the older DWMT81096 1/4 in. ratchet on its own at US$21.99. At the lower prices ToolGuyd saw, the 1/4 in. set costs not much more than a single DEWALT ratchet plus a few sockets.
Is the warranty any different?
No. Both pages list DEWALT’s Full Lifetime Warranty, the same term as the older DWMT81610. Check how your store handles hand tool warranty swaps before you rely on it for a crew.

What is still unknown?
- The exact SAE and metric socket sizes in each set.
- The spark plug socket size in the DWMT45423.
- Which bit types and sizes the 22 bits are.
- Whether the sets are sold outside the United States; DEWALT’s Canadian site carries product pages for both, but this story has not confirmed stock or price there.
Who it suits
- Technician or tradesperson with limited bag space: the thinner head helps in engine bays, appliances and cabinets. Check the socket size list on the box against the fasteners you meet most.
- First time buyer or car owner: the 3/8 in. set with a spark plug socket covers more automotive jobs. Confirm the spark plug socket size matches your engine before you buy.
- Homeowner on a budget: the 1/4 in. set is the cheaper one when bought near ToolGuyd’s price. It will not replace a full socket collection with deep sockets.
- Someone who already owns DEWALT’s older 50-piece set: the new ratchet is the upgrade. If your current ratchet fits where you work, there is little reason to buy the set again.
- Crew or fleet buyer: the lifetime warranty matches DEWALT’s older sets; compare it with your current supplier’s swap terms.
Open the DEWALT product page for the drive size you want, then compare at least two store prices and look for the socket size list on the packaging before you order.




