Makita’s new XFD17 driver drill is listed at $129 as a bare tool, with the XPH17 hammer drill at $139 and the XWT20 impact wrench at $169, all as pre-orders at Acme Tools. Makita has not said when any of them will ship.

What are the three new Makita tools?

All three run on the 18V LXT battery platform and use brushless motors. The XFD17 is a 1/2 inch driver drill. The XPH17 is the same tool with a hammer drilling mode that reaches 28,500 blows per minute, according to SlashGear’s November 5 report. The XWT20 is a compact 1/2 inch square drive impact wrench.

Makita’s own product page for the XFD17Z marks it as new, which confirms the drill exists and is part of the catalogue. The page does not list a price or a release date. The XPH17 and XWT20 details below come from SlashGear’s report, since the Makita pages for them could not be confirmed today.

How do the specs compare?

Makita’s page and SlashGear give the same figures for the drill: 580 in-lbs of torque, two speed ranges up to 1,900 RPM, a 1/2 inch keyless chuck and 20 clutch settings. It is 6-9/16 inches long and weighs 3.7 lbs with a 3Ah battery. Makita lists capacity as 1/2 inch in steel and 1-1/2 inches in wood.

Model Type Key figures (maker or reported) Bare tool price
XFD17Z Driver drill 580 in-lbs, up to 1,900 RPM, 3.7 lbs with 3Ah battery $129
XPH17 Hammer driver drill Same drill figures, plus up to 28,500 blows per minute $139
XWT20Z Impact wrench 170 ft-lbs fastening, 300 ft-lbs nut-busting, up to 2,300 RPM, up to 3,200 impacts per minute, 3.2 lbs with 3Ah battery $169

The XWT20 also has a built-in LED. These are maker or retailer-reported figures, not independent test results.

When can I get them and what do they cost?

SlashGear says all three are pre-order only at Acme Tools and that Makita has not announced shipping dates. Tool Nut also lists the XFD17Z at $129.00 USD, marked out of stock and available to order, and states a 3-year limited warranty on the tool, per Makita. The prices above are bare tool prices at the time of writing and can change.

Battery and charger are not included. Tool Nut says the drill runs on any Makita 18V LXT slide-style battery sold separately. Makita’s page also shows a kit, XFD17S1, that includes a 3.0Ah battery, but no kit price has been published.

Who it suits

Who should buy it depends on what is already in the toolbox.

  • Existing LXT owners: the bare tool prices fit you best, because your batteries and chargers carry over. Check that your batteries are the slide-style packs the retailer describes.
  • Tradespeople working overhead or in tight spaces: the 3.7 lbs and 6-9/16 inch length on the drill are the figures to weigh against your current tool. Makita has not published runtime figures here.
  • First time buyers: the kit with a 3.0Ah battery is the likelier starting point, but you will need to wait for kit pricing.
  • Budget minded DIYers: the XFD17 at $129 has no hammer mode, so masonry work points to the XPH17 at $139.

If you already own LXT batteries and want a compact drill, the XFD17Z is the one to watch. Check Makita’s product pages and the Acme Tools listings for a ship date before you pre-order.